Suggestions
Top Results
Select…
An open-architecture DSP, the Bose Professional ControlSpace ESP-880A engineered sound processor is designed for a wide variety of applications – from small, self-contained projects to large, networked systems. It features 8 × 8 analog audio I/O, a Bose Professional AmpLink output, and advanced digital signal processing with 48 kHz/24-bit audio conversion. Engineered for precise performance, the ControlSpace ESP-880A also features low-latency and ultra-low noise operation.
Onboard connectivity includes rear-panel Ethernet for configuration and control, RS-232, 5 control inputs, five control outputs and an 8-channel AmpLink port for sending digital audio to Bose Professional amplifiers. The ESP-880A also supports integration with industry-standard control systems, such as Crestron and AMX, and can be used with any of the compatible Bose Professional end-user control options such as the ControlCenter digital zone controllers and mobile-ready ControlSpace Remote.
Configure and control the ESP-880A using Bose Professional ControlSpace Designer software, where a large set of signal processing modules, such as automatic mic mixers, predictive feedback suppressors, room combiners, multiband graphic and parametric EQs, Bose Professional loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors, and delays offer an elevated level of functionality for general installed audio applications. Program end-user controls and automation events visually with less complication and more predicable operation on-site. With ControlSpace Designer software, an entire audio system with multiple components can be configured, monitored, and tuned live for creating custom-designed audio and control solutions that save design time and offers outstanding flexibility to better meet client needs.
High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 115 dB dynamic range
Advanced digital signal processing supports audio at 48 kHz sample rate/24-bit, uses a floating-point open architecture DSP and operates at low latencies for sound system precision
Integrated AmpLink output connection uses standard Cat 5 cables to send up to 8 channels of low-latency, uncompressed digital audio to compatible Bose Professional amplifiers
ControlSpace Designer software enables a large set of signal processing modules, such as automatic mic mixers, predictive feedback suppressors, room combiners, multiband graphic and parametric EQs, loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors and delays
A variety of control options — ControlSpace ESP products are compatible with programmable Bose Professional CC-64 controller, ControlCenter zone controllers and ControlSpace Remote clients
Supports industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports, with available drivers for AMX and Crestron-based systems
Designed for a wide range of applications, including:
Auditoriums
Places of worship
Resorts and hospitality venues
Retail stores
Educational institutions
Channel Separation (Crosstalk)
< -105 dB at +4 dBu, 1 kHz input signal
Dynamic Range
> 115 dB, A-weighted, 20 Hz – 20 kHz, analog through
Frequency Response
20 Hz – 20 kHz (+0.3 dB/-0.1 dB)
THD+N
0.002% at +4 dBu (A-weighted, 20 Hz – 20 kHz)
AEC-Enabled
No
Input Channels
8 balanced, mic/line
Connectors
(4) 6-pin Euroblock, 3.81 mm
Equivalent Input Noise
< -119 dBu at 64 dB gain (150 Ω input, 22 Hz – 20 kHz)
Sensitivity Options
0 dB, +14 dB, +24 dB, +32 dB, +44 dB, +54 dB, +64 dB, pre-gain
Input Impedance
12 kΩ at 1 kHz, with or without phantom power
Maximum Input Level
+24 dBu
Phantom Power
48 VDC, 10 mA, selectable per input
Channels
8 AmpLink out
(1) RJ-45 AmpLink out
Type
AmpLink (output)
8 balanced, line
Maximum Output Level
Output Impedance
66 Ω
Colors
Black
Cooling System
Active, side-venting
Suspension/Mounting
Standard rack ears
Net Weight
5.7 lb (2.6 kg)
Operating Temperature Range
0 °C to 40 °C (32 °F to 104 °F)
Product Dimensions (H×W×D)
1.7 in × 19.0 in × 8.5 in (44 mm × 483 mm × 215 mm)
Rack Spaces
1RU
EN 54-24 Certified
Inputs (Control)
(5) analog/digital, 6-pin Euroblock, 3.81 mm / (1) serial RS-232, DB9M / (1) ControlCenter CC-16, 3-pin Euroblock, 3.81 mm
Voltage Range, Analog
0 V – 3.3 V (5 V maximum)
Digital Input Voltage
0 V – 3.3 V (1.6 V threshold)
Outputs (Control)
(5) digital, 6-pin Euroblock, 3.81 mm
Output Current
10 mA source, 100 mA sink (24 VDC maximum external supply voltage)
Output Voltage
High: 8 V (open circuit), 2.5 V at 10 mA / Low: < 1 V at 100 mA, push-pull
Mains Connector
IEC 60320-C14 inlet
Mains Voltage
85–264 VAC, 50/60 Hz
AC Power Consumption
< 37 VA typical, over all mains voltages
Power Dissipation
22 W (75 BTU/hr, 19 kcal/hr)
Computer Interface Connection
RJ-45 (Ethernet, 100 Mbps)
Software Applications
ControlSpace Designer (Windows)
LED Status Indicators
(1) power/status LED, (1) input/output signal LED, (1) Ethernet LED, (1) serial control LED
A/D and D/A Converters
48 kHz / 24-bit
Audio Latency
860 μs, analog input to analog output
Delay
43 s
DSP-Enabled
Yes
Maximum Calculation
3.6 GIPS / 2.7 GFLOPS
Signal Processor/CPU
32-bit fixed/floating-point DSP + Arm 456 MHz processor
Sample Rate / Bit Depth
5 years
(1) 3-pin Euroblock connector
(1) ControlSpace ESP-880A
(1) installation guide
(1) power cord
(10) 6-pin Euroblock connectors
(11) cable ties
Bose Professional ESP-880A, ESP-1240A, ESP-880AD and ESP-1240AD engineered sound processors leverage over a decade of research and engineering to bring expansive, yet cost-effective audio processing solutions that serve a number of installed professional audio applications. These 1RU processors feature high-quality digital conversion, powerful open-architecture signal processing using ControlSpace Designer software, Amplink digital connectivity, and flexible 32 × 32 Dante network audio on the AD models.
ControlSpace engineered sound processors serve as the backbone to installed sound systems, offering high-quality analog/digital audio processing, network connectivity, and seamless integration with elegant end-user controls. Applications include concert halls, auditoriums, educational institutions, places of worship, retail, and hospitality locations. ControlSpace engineered sound processors feature open-architecture DSP and are programmed using ControlSpace Designer software. With Designer software, a full suite of signal processing modules can be applied, including automatic mic mixing, multiband graphic and parametric EQs, loudspeaker EQ libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors and delays.
The ESP-880A provides 8 × 8 audio channels and 8 AmpLink outputs.
The processor has 5 general-purpose input 5 general-purpose outputs, capable of sensing input from switches and potentiometers, and driving low voltage digital output for external devices.
Yes. ControlSpace networked systems can be monitored and controlled remotely. ControlSpace Designer software includes specific features to support this advanced functionality.
ControlSpace Designer software is a design and configuration tool for creating sophisticated, high-quality audio systems using Bose Professional networkable processors, endpoints, amplifiers, and end-user controllers. Quickly and confidently apply signal processing functions like routing, switching, dynamics, and mixing to audio paths using Designer’s intuitive drag-and-drop interface. Program end-user controls and automation events visually with less complication and more predicable operation on-site. With ControlSpace Designer software, an entire audio system with multiple components can be configured, monitored, and tuned live for creating custom-designed audio and control solutions that save design time and offers outstanding flexibility to better meet client needs.
New features include: Standard Room Combiner, Predictive Feedback Suppressor, Parameter Set Lists, Human Interface Device (HID) support for EX-1280C, Support for Shure MXW and ULXD microphones.
ControlSpace Designer software currently supports Microsoft Windows-based PCs and is compatible with versions Windows 7 and higher. Currently, ControlSpace Designer is not natively supported on the Apple macOS platform, although many users report success using VMWare Fusion and Parallels Desktop virtual machines.
Yes. All signal processing modules, parameter sets, and groups are directly controllable by third-party devices via the RS-232 port or Ethernet (Serial over Ethernet) on Bose Professional ESP and EX processors. Driver files for Crestron and AMX are available on the BoseProfessional.com website to ease integration and control with these systems.
