Suggestions
Top Results
Select…
Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P4300A provides 300 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple.
300 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems
AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
I-Share outputs deliver 2x power level by combining the current of two channels
Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
Designed for a wide range of applications, including:
Retail stores
Restaurants and bars
Hospitality venues
Conference centers
Schools
Auxiliary zones
Channel Separation (Crosstalk)
> 80 dB at 1 kHz, > 65 dB at 20 kHz
Dynamic Range
≥ 100 dB at rated power, A-weighted
Frequency Response
20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V
Gain, High-Impedance
35 dB, 70V mode / 38 dB, 100V mode
Gain, Low-Impedance
32 dB
Maximum Peak Power, Symmetrical
600 W
Number of Channels
4
Power Class
Class D
Rated Power, Symmetrical
300 W
THD+N
< 0.04% at 1 kHz, 4–8 Ω, 70V/100V
Input Channels
4 balanced
Connectors
(2) 6-pin Euroblock
Input Impedance
10 kΩ
Maximum Input Level
22 dBu at 14 dBu sensitivity
Sensitivity
-10 dBV, 4 dBu, 14 dBu
Channels
8 AmpLink in, 8 AmpLink thru
(1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru
Type
2 × 6-pin Euroblock
(1) 8-terminal block
Colors
Gray
Cooling System
Microprocessor-controlled variable-speed fans, front-to-back air flow
Suspension/Mounting
Rack-mounting
Net Weight
14.6 lb (6.6 kg)
Operating Temperature Range
0 °C to 40 °C (32 °F to 104 °F)
Product Dimensions (H×W×D)
1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm)
Rack Spaces
1
Shipping Weight
19.0 lb (8.6 kg)
EMC
This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.
Mains Connector
IEC 60320-C14 inlet
Mains Voltage
100–240 VAC (±10%), 50/60 Hz
AC Power Consumption
25 W auto-standby, 570 W maximum
Controls, Front Panel
(1) power button
Controls, Rear Panel
Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity
LED Status Indicators
(1) power/status LED, (4) input signal LEDs, (4) output limit LEDs
DSP-Enabled
No
5 years
(1) 2-pin Euroblock connector
(1) Cat 5e cable, 3.3 ft (1 m)
(1) IEC power cord
(1) installation guide
(1) PowerSpace P4300A
(10) terminal forks, 14–16 AWG
(2) I-Share jumpers
(4) 3-pin Euroblock connectors
