Suggestions
Top Results
Select…
EdgeMax loudspeakers combine bold surface-mount performance with stealthy design to shatter the limitations of traditional in-ceiling loudspeakers. Patented PhaseGuide® technology enables EdgeMax loudspeakers to project powerful, focused sound asymmetrically from the room’s edges to the center.
New EdgeMax LP models feature an 80-degree vertical coverage angle for use in rooms with lower ceilings, and their shallow 4-inch backcan is ideal for spaces with above-ceiling limitations and tighter clearances. Larger rooms with higher SPL needs benefit from the powerful, deeper 9-inch cans and 75-degree vertical coverage of the original EdgeMax models.
EdgeMax models are purpose-built to provide specific horizontal coverage. The EM90-LP’s 90-degree horizontal coverage angle is optimized for corner placement, with wall-boundary loading providing extended bass impact.
Integrators can “mix and match” original EdgeMax and new LP loudspeakers, particularly in challenging installations with varying space dimensions and above-ceiling obstructions.
Patented PhaseGuide technology distributes sound asymmetrically throughout the space to ensure all listeners enjoy the same experience—regardless of their location
In-ceiling installation for minimum visual impact, with fewer units required to deliver uniform sound
High-frequency compression driver and high-excursion woofer for exceptional audio quality and power
In-ceiling mounting along room edges and corners; purpose-built for specific horizontal coverage—90 degrees for corner placement or a wider 180 degrees—ideal for near-field and wide coverage
Wall-boundary loading for greater bass response and performance
2-way passive crossover with bypassable 70/100V transformer
Consistent voicing across the EdgeMax family
QuickHold spring-loaded mounting system for easy installs
Magnetically attached grille for quick access to wiring and tap settings
Shallow 4-inch (10 cm) backcan height for rooms with above-ceiling limitations and tighter clearances
80-degree vertical coverage angle for use in rooms with lower ceilings
UL 62368 and UL 2043 safety standard compliance
Designed for a wide range of applications, including:
Conference rooms, halls, atriums & cafeterias
Hospitality spaces with low ceiling clearance
Restaurant
Retail
Retrofits with unknown ceiling clearance
Safety Agency Ratings
UL 62368, UL 2043
Colors
White (similar to RAL 9003), paintable
Ceiling Cutout
345 × 345 × 100 mm (13.6 × 13.6 × 4.0 in), length × width × mounting depth
Enclosure Material
Engineered-plastics front baffle with integrated steel-formed enclosure
Environmental
Indoor only
Grille
Microperforated steel, powder-coated finish, paintable
Suspension/Mounting
(4) Quickhold spring-loaded mounting arms, (4) safety cable attachment points
Net Weight
16.6 lb (7.5 kg), loudspeaker with grille (single)
Product Dimensions (H×W×D)
339 mm × 339 mm × 100 mm (13.4 in × 13.4 in × 3.9 in) enclosure / 390 mm × 390 mm × 13 mm (15.4 in × 15.4 in × 0.5 in) grille flange
Shipping Weight
11.0 kg (24.3 lb)
Frequency Range (-10 dB)
45 Hz – 19,000 Hz
Coverage, Horizontal
90°
Calculated Maximum SPL @ 1 m
110 dB continuous, 116 dB peak
Nominal Impedance
8 Ω (transformer bypassed)
Power Handling, long-term continuous
32W
Power Handling, Peak
128W
Recommended Signal Processing
Recommended but not required
Sensitivity (SPL/1 W at 1 m)
91 dB
Transformer Taps, 100V
8 W, 16 W, 32 W, bypass
Transformer Taps, 70V
4 W, 8 W, 16 W, 32 W, bypass
Coverage, Vertical
80°
Crossover
1 kHz, passive 2-way crossover with integrated 70/100V transformer
Driver Protection
Recommended high-pass protection 55 Hz with minimum 24-dB/octave filter
High-Frequency
1 × compression driver, 1.3 in (33 mm) voice coil
Low-Frequency
1 × 5.25-in (133 mm) woofer, 1.5-in (38 mm) voice coil
(1) ceiling hole template
(1) installation guide
(1) paint shield
(1) tile bridge
