Suggestions
Top Results
Select…
Full-range environmental loudspeaker designed to blend with landscaping for in-ground or above-ground applications, such as shopping malls, outdoor restaurants, resorts and theme parks. Features 360° horizontal coverage and frequency range down to 60 Hz.
For indoor and outdoor applications.
Full-range environmental loudspeaker with one downward firing 4.5-inch (114 mm) advance composite environmental full-range driver for in-ground or above-ground mounting
Domed port grille reflects sound into the listening area for clear, consistent performance
Cabinet shape acts as acoustic diffuser directing mid- and high-frequency energy out towards listeners. Base of loudspeaker acts as a tuned, multi-chambered ported enclosure
Multi-tap line transformer provides easy-to-change tap settings
Tamper-resistant design
Internal speaker protection circuit safeguards drivers
Designed for a wide range of applications, including:
Shopping centers
Restaurants and bars
Cafes
Resorts and hospitality venues
Theme parks
Atriums and malls
Ingress Protection
IP35
Suspension/Mounting
3 × #10 (M4) holes in base, 3 × #10 (M4) screws required
Net Weight
14.5 lb (6.6 kg)
Product Dimensions (H×W×D)
368 mm × 379 mm (14.5 in × 14.9 in), loudspeaker diameter × height
Shipping Weight
14.9 lb (6.8 kg)
Frequency Range (-10 dB)
60 Hz – 15,000 Hz
Coverage, Horizontal
360°
Calculated Maximum SPL @ 1 m
107 dB
Nominal Impedance
8Ω (transformer bypassed)
Power Handling, long-term continuous
70/100V: 80 W / 8Ω: 65 W
Power Handling, Peak
70/100V: 320 W / 8Ω: 260 W
Recommended Signal Processing
No Bose Professional EQ required. For best performance, Bose Professional EQ presets available.
Sensitivity (SPL/1 W at 1 m)
87 dB
Transformer Taps, 100V
10, 20, 40, 80 W, bypass
Transformer Taps, 70V
10 W, 20 W, 40 W, 80 W, bypass
Coverage, Vertical
50°
Driver Protection
Recommended high-pass filter 60 Hz with minimum 24-dB/octave filter, Presets available
Low-Frequency
1 × Bose Professional 4.5 in (114 mm) environmental driver
(1) FreeSpace 360P Series II
(1) installation guide
(8) wire nuts
The FreeSpace 360P Series II is an 80-watt, full-range high fidelity loudspeaker for in-ground and surface installations. It features durable construction and a tamper-resistant design that provide protection from weather, damage and theft. A heavy-duty enclosure and advanced composite driver make this loudspeaker rugged and reliable. It withstands sand, snow, rain, salt and temperature extremes of 158°F (70°C) to -40°F (-40°C). And it survives the Salt Fog test 66% longer than the demanding Marine Industry Standard. The freestanding design with simplified mounting features allows for fast and secure installation in the ground, or attached to a horizontal concrete or wood surface.
The new FreeSpace 360P Series II in-ground loudspeaker is a proven solution for outdoor commercial applications such as restaurants, amusement parks, open-air retail environments, resorts, sports facilities and hospitality venues. It is designed to blend into such outdoor environments as shrubbery, gardens and pool areas, so you can put sound where the listeners are. Its innovative design provides 360° coverage, which means fewer loudspeakers are needed than with many conventional ground or surface-mounted loudspeakers.
Its newly styled polypropylene cabinet makes it easier to install in the ground or on a solid surface. The base plate has been integrated into the product base for simple installations. The FreeSpace 360P Series II loudspeaker has a new, more powerful 80-watt transformer and higher sensitivity—so it plays more than 6 dB louder with less power. Product wiring and tap changes are as simple as twisting two wires together and sealing with the included wire nuts. The domed grille on the base has been upgraded to corrosion-resistant aluminum for protection in high salt environments.
The FreeSpace 360P Series II loudspeaker is available in one model, which can be used in 70-volt, 100-volt, or low-Z (8 Ω) operation and comes in one color: green. PN 40151.
The FreeSpace 360P Series II loudspeaker comes with an instruction sheet and wire nuts for the wire terminations. It is ready to mount in the ground or on a horizontal surface. Three #10 or M4 mounting screws (not included) are required for mounting to a hard surface.
No accessories are necessary for the FreeSpace 360P Series II loudspeaker.
It can be buried in the ground in a hole up to 6.5″ (165 mm) deep. All connections are made at the end of the cable exiting from the loudspeaker. Connect the designated wires to the cable from your amplifier + and – terminals, then protect the connections with the included wire nuts. Twist the appropriate color wire for your desired tap setting with the tap common wire, then use a wire nut to seal. Cap all unused remaining wires with the included wire nuts. Lay the wire junctions in the ground (the wire nuts have silicone for a seal), or install in a bury-rated junction box.
For surface applications, such as on a deck or patio, place the external cable and wire connections under the loudspeaker or in an external junction box. Secure to the surface with three #10 or M4 mounting screws (not included).
No active equalization is necessary; a 60 Hz high-pass filter is recommended.
80 W, 40 W, 20 W, 10 W and bypass (low-Z 8 Ω) tap settings are available.
At the end of the product cable, twist the appropriate color wire for your desired tap setting with the tap common wire, then use a wire nut to seal. Cap all unused remaining wires with the included wire nuts. The wire color designations for each wattage tap are listed in the product manual and on the product label on the bottom of the loudspeaker.
For low-Z (8 Ω) operation, do NOT connect the red and yellow (70V and 100V) wires. Connect the white wire (XFRM) to positive (+) and connect the black wire (COM) to the negative (–). Rated 65 W continuous/260 W peak when operated in low-Z (8 Ω).
